{"product_id":"cloudcraftsim-handbrake-v2","title":"CLOUDCRAFTSIM HANDBRAKE V2","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUSB SIM RACING HANDBRAKE- CLOUDCRAFTSIM HANDBRAKE V2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA compact, reliable USB handbrake designed for sim racing. Built around a contactless hall sensor and a structural 3D-printed design, it delivers smooth analog input for drifting, rally, and other racing simulations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlug-and-play with PC, simple calibration, and easy desk mounting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePRODUCT OVERVIEW\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis handbrake is a USB peripheral for PC racing simulators. It functions as an analog handbrake axis and can be mapped directly in most racing titles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is primarily intended for drifting, rally, and other racing disciplines where a dedicated handbrake input improves control and realism.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe device connects directly to a computer through USB and appears as a standard controller axis, allowing quick setup without special drivers or software.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLever position is measured using a contactless hall sensor, which provides smooth and consistent input without the wear associated with traditional potentiometers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe mechanical structure combines PETG 3D-printed structural components with standard bolts and readily available hardware to create a compact and durable assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDESIGNED FOR ADDITIVE MANUFACTURING\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe product is intentionally engineered around additive manufacturing as a final production method. The structural components are 3D printed from PETG and designed specifically for this process rather than adapted from traditional machining methods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBy designing the geometry for 3D printing from the start, it becomes possible to reduce part count, create compact structures, and simplify manufacturing while maintaining good mechanical rigidity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eABOUT THE 3D PRINTED DESIGN\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is understandable that some people may initially be sceptical about a product that uses 3D-printed structural components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe goal of this project is not to hide that fact, but to design around it properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe parts are printed from PETG, a durable engineering plastic commonly used for functional components. The design itself has gone through repeated testing and iteration to ensure the assembly remains rigid and reliable during normal use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInstead of pretending the product is something it is not, the design embraces the advantages of additive manufacturing: efficient geometry, lightweight construction, and the ability to iterate and improve the design continuously.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis product is the result of many design revisions and real-world testing, developed as part of an ongoing engineering project.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWHY THIS PROJECT EXISTS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis project exists because of a simple combination of interests: sim racing, engineering, and learning new skills.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe handbrake started as a personal engineering project built out of curiosity and the desire to create something functional while improving design, manufacturing, and electronics skills.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOver time the design evolved into a product that others in the sim racing community might also find useful.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is still very much a small independent project, and that mindset remains part of the product itself.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSMALL-BATCH PRODUCTION\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis handbrake is produced in small batches as part of an independent engineering project.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBecause of this approach, the design may evolve over time as improvements are made.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe goal is simple: build a solid piece of sim racing hardware that works well and keeps getting better.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRELIABILITY AND SUPPORT\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnder normal use the handbrake is designed to perform reliably and withstand regular sim racing use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHowever, because this is a small-batch product produced in limited quantities, it is always possible that unforeseen issues may appear over time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf that happens, the goal is to address those situations openly and fairly. Any problems that occur with the product will be supported and resolved as best as possible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe intention behind this project is not just to sell hardware, but to build something useful for the sim racing community and stand behind it.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMOUNTING OPTIONS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDesigned for desk setups, the unit can be mounted using the included adjustable C-clamp, allowing installation without drilling or permanent modification.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eROTATABLE HANDLE\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe handle can be rotated to allow two different orientations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVertical configuration — commonly used for rally style setups\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eHorizontal configuration — often preferred for drifting setups\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe orientation can be adjusted depending on personal preference and available mounting space.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSIMPLE CALIBRATION\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCalibration is intentionally minimal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe user only needs to define the minimum and maximum lever positions, after which the firmware automatically maps the full motion range to the input range used by the simulator.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNo complex software or tuning is required.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eKEY FEATURES\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContactless hall sensor for precise and reliable input.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eSmooth analog control for drifting and rally simulation.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003ePurpose-designed PETG 3D-printed components.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003ePlug-and-play USB connection.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eQuick minimum \/ maximum calibration.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eRotatable handle for vertical or horizontal orientation.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eDesk mounting using C-clamp\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATIONS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConnection: USB type A \u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003ePlatform: Windows PC\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eSensor type: Hall effect sensor (contactless)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eInput type: Analog axis\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eConstruction: PETG printed with standard hardware\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMounting options:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eDesk mounting with C-clamp (for desks up to 40mm thickness\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHandle orientation: Vertical or horizontal\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eCalibration: Minimum \/ maximum range calibration\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIN THE BOX\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUSB Sim Racing Handbrake\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eUSB type A Cable (2m length)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eDesk Mount C-Clamp\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eQuick setup instructions\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Cloudcraftsim","offers":[{"title":"Tabletop","offer_id":59456178389326,"sku":null,"price":94.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/6523\/2462\/files\/1bilde1.png?v=1777739874","url":"https:\/\/cloudcraftsim.com\/products\/cloudcraftsim-handbrake-v2","provider":"Cloudcraftsim","version":"1.0","type":"link"}